This study was carried out to examine the degradation dynamics of neutral detergent fibre (NDF) and the profile of volatile fatty acids that originate from the fermentation of buffel grass (Cenchrus ciliaris, L.) with various levels of ammonia in the growth medium. The treatments consisted of six levels of ammonia in the growth medium (0, 5, 10, 15, 20 and 30 mg/dL), which were obtained by adding urea. These in vitro incubation times were evaluated in three replicates per time for 0, 3, 6, 9, 12, 24, 36, 48, 72 and 96 hours. Rumen concentrations of acetate and propionate responded quadratically to the ammonia levels. The treatment with 15 mg/dL of ammonia nitrogen in the rumen fluid provided mean acetate and propionate contents of 57.6 mM and 23.1 mM, respectively. Urea addition elevated the degradation rate of potentially degradable fraction of NDF (pdNDF) from 2.5% to 20.1% in comparison with the treatment without urea and to a reduction in estimated discrete lag time from 0.34 to 2.31 hours. Urea supplementation increased the specific microorganism growth rate from 2.6% to 20.1%. At the end of the incubation trial, NDF degradation showed a quadratic response, with maximum value obtained at 17.76 mg/dL of ammonia in the rumen fluid. Urea improves the degradation dynamics of NDF from deferred buffel grass and increases the concentrations of acetate and propionate.

This study aimed to evaluate the microbial populations, fermentation profile, dry matter recovery and chemical composition of elephant grass silage with ground maize (GM) and the fermented juice of epiphytic lactic acid bacteria (FJLB). A factorial design was used with four levels of GM (0 g/kg, 50 g/kg, 100 g/kg and 200 g/kg), untreated or treated with FJLB, in a completely randomized design with five replicates. A pre-experiment was undertaken to determine the optimum level of sucrose to be added to fermented juice for the development of epiphytic microflora. In this pre-experiment, a completely randomized design with three replications was used. The treatments were represented by the levels of sucrose (0 g/kg, 5 g/kg, 10 g/kg, 20 g/kg, 40 g/kg, 60 g/kg and 80 g/kg, fresh matter basis). The microbial populations, dry matter recovery, and effluent losses were affected by the interaction between GM and FJLB. Dry matter (DM) and crude protein (CP) contents increased linearly with the inclusion of GM. The addition of GM enhanced the fermentation process via a reduction in losses, and improvements were identified in the nutritional value of elephant grass silages. The use of fermented juice increased dry matter recovery, and its effect was more pronounced when ground maize was added.

Objetivou-se com esta pesquisa avaliar as silagens de 23 híbridos de sorgo por meio da técnica in vitro semiautomática de produção de gases. Foi utilizado o delineamento inteiramente ao acaso, com 23 tratamentos e três repetições, sendo os tratamentos as silagens de híbridos de sorgo. Os híbridos foram cultivados na estação experimental do Instituto Nacional do Semiárido (INSA), no município de Campina Grande - PB. A produção de gases foi estimada por intermédio do modelo logístico bicompartimental, ajustado às curvas de produção cumulativa de gases. Com relação ao volume final de carboidratos fibrosos (VfCF), houve efeito de híbrido (P<0,05), com resultados variando de 105,99 a 144,53mL/g de MS. Os valores de taxa de degradação dos carboidratos fibrosos (KdCF) variaram (P<0,05), e o híbrido 866041 apresentou o maior resultado 0,015h-1. Os valores de volume final total (VfT) variaram (P<0,05), e os híbridos 870085, Volumax e XBS 60329 apresentaram maiores (P<0,05) valores de VfT em relação aos demais. Pela análise multivariada, foram formados seis grupos distintos. O grupo 2, composto pelos híbridos 22 (Volumax) e 23 (XBS60329), apresentou os maiores valores médios para os volumes de gás, tanto para os carboidratos fibrosos quanto para os não fibrosos. O grupo 4, composto pelo híbrido 1 (866005), apresentou as menores médias para volume de gás produzido e o maior lag time (3,15 horas). Todos os híbridos estudados apresentam potencial para ensilagem, de acordo com a cinética de fermentação ruminal.

The aim of this research was to evaluate the silage of 23 sorghum hybrids using the in vitro semi-automatic gas production technique. A completely randomized design with 23 treatments was used, with three replications, and treatments were the sorghum-hybrids silages. Hybrids were grown at the experimental station of the Instituto Nacional do Semiárido (INSA), in Campina Grande - PB. The gas production was estimated using the bicompartimental logistic model, adjusted to the curves of cumulative gas production. A significant effect (P<0.05) was observed for final gas of fibrous carbohydrates (VfCF), which results ranged from 105.99 to 144.53mL/g of DM. Degradation rate of fibrous carbohydrates (KdCF) values ranged (P<0.05) for the hybrid 866041, which showed the highest result 0.015h-1. Final total volume (VFT) was affected by hybrid (P<0.05), in which hybrids 870085, Volumax and XBS60329 had the highest (P<0.05) values compared to other hybrids. By multivariate analysis were formed six distinct groups. Group 2, consisting of hybrids 22 (Volumax) and 23 (XBS60329) showed the highest average values for gas volumes, both for fibrous carbohydrates and for the non-fibrous. Group 4, comprising the hybrid 1 (866005), had the lowest gas volume produced means and a highest lag time (3.15 hours). All hybrids studied have potential to silage, according to the ruminal fermentation kinetics.

Aimed to evaluate the morphogenetic and structural characteristics of the pasture of Brachiaria decumbens, subjected to several intensities and frequencies of cutting and nitrogen fertilization. Experimental design was randomized blocks in split plots, whit a 2 x 2 factorial arrangement relating to combinations of two cutting heights (40 and 50 cm) and two heights of residue (15 and 25 cm) at the plots and nitrogen fertilization (with or without nitrogen) in sub-plots, with four replications. Mophogenetic variables evaluated were: leaf elongation rate (LER), stem elongation rate (SER), leaf appearance rate (LAR), leaf senescence rate (LSR) and phyllochron; and structural features were: number of basal tillers (NBT), total number of leaves (TNL), number of leaves appeared (NLAp), number of dead leaves (NDL), number of alive leaves (NAL) and final leaf length (FLL). 100 kg N/ha allowed increase (p<0.10) on LER of 31.58% and 126.32% respectively for residues 15 and 25 cm. The NBT compared to cutting heights (40 to 50 cm) were affected (p<0.10) only with the use of nitrogen fertilizer, with average of 145.62 tillers/m² in 50 cm cut height. Residue height of 25 cm combined with cut height 40 cm increase leaf elongation rate and number of basal tillers, reducing expansion time, without changing other structural characteristics of the pasture.

Objetivou-se avaliar as características morfogênicas e estruturais do pasto de Brachiaria decumbens, submetido a intensidades, frequências de corte e adubação nitrogenada. O delineamento experimental foi em blocos casualizados em esquema de parcelas subdivididas, tendo na parcela o arranjo fatorial 2 x 2 referente a combinações entre duas alturas de corte (40 e 50 cm) e duas alturas de resíduo (15 e 25 cm) e nas sub-parcelas a adubação nitrogenada (com ou sem nitrogênio), com quatro repetições. As variáveis analisadas para as características morfogênicas foram: taxa de alongamento foliar (TAlF); taxa de alongamento de colmo (TAlC); taxa de aparecimento foliar (TApF); taxa de senescência foliar (TSF) e filocrono; e para as características estruturais foram: número de perfilhos basais (NPB); número de folhas totais (NFT); número de folhas aparecidas (NFAp); número de folhas mortas (NFM); número de folhas vivas (NFV) e comprimento final da folha (CFF). A utilização de 100 kg/ha de N permitiu aumento (p<0,10) na TAlF de 31,58% e 126,32%, respectivamente para os resíduos de 15 e 25 cm. O NPB em comparação às alturas de corte (40 e 50 cm) foi afetado (p<0,10) apenas com a utilização da adubação nitrogenada, observando-se média de 145,62 perfilhos/m² para a altura de corte 50 cm. A altura de resíduo 25 cm combinada com a altura de corte 40 cm, junto à aplicação de 100 kg/ha de N, promovem maior produção de matéria seca total em menor espaço de tempo (28 dias), permitindo maiores taxas de lotação e facilitando o manejo no sistema de lotação rotacionada.